Anchor holder

FAQ

Profile

Anchor holder

Boat US (Home) -> Boat Building

Next: Atlantic ICW Obstruction Found and Removed - Ship..

Author

Message

Gordon

External

Since: Dec 28, 2006
Posts: 19

(Msg. 1) Posted: Sun Nov 11, 2007 10:07 am Post subject: Anchor holder Archived from groups: rec>boats>building (more info?)

My P365 has a relatively long bow protuberance made of teak to stow the anchor on. Even Pearson agrees this is not to be used to anchor off of or to break an anchor loose. In other words, it is useless. I'm going to replace it with something shorter and stronger that is actually useful. I'm thinking of laminating something like 1x2 boards and fabricating from that. So what kind of wood will give the strength and good looks required? Thanks Gordon >> Stay informed about: Anchor holder

Display posts from previous:

Related Topics:

Anchor Pulpit Construction - Hello, I am looking into the option of custom building a teak anchor pulpit for my 28 Cape Dory power boat. I was wondering if anyone could help me with some insight into the proper technique for doing this. Any help would be appreciated! Thanks in..

Installing Anchor Chocks? - I an installing stainless steel Anchor Chocks on the deck of my Bayliner 2850. Should I use machine screws and drill all the way through to the V-Birth using plywood as backing with washers and nuts? Or just use wood screws and zap then in with a pilot....

Putting a screw into fg with a anchor? - A few weeks ago I posted about fixing a seat on my sailboat that was loose. Today I removed all the screws and pulled the seat out. The screws are held only by the fiberglass; I thought there would be some wood, but there isn't. I plan on using bigger..

anchor, bow roller system question - Hi, I own a 1942 83 Ft. Wheeler (80 tons) and am rebuilding the anchor chain locker. My plans are to add a bow roller for the chain and to guide the anchors. Of course it has to be strong enough to handle the boat during heavy storms/hurricanes when..

HOW2 increase anchor weight ? - I just read about someone increasing their CQR anchor heft by adding lead. Has anyone knowledge of how this can be properly done ? Thanks again, Courtney

	Boat US (Home) -> Boat Building	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum