Welcome to BoatForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

Old deck problem

 
   Boat US (Home) -> Boat Building RSS
Related Topics:
Deck material - Hi fellow Sailing Maniacs Now for this winter's project: I have a 27' GRP fishing boat hull - with a deck below (2-1½') the railing. In order to make more use of the room inside, I would like to make a new deck on top of the railing. The..

Deck fittings - Hello, I bought a space sailer 22 last week (for those that don't know this is a 22 foot masthead I am looking to set the boat up for racing but the previous few owners of the boat did not race her so some of the fittings have..

Teak Deck - I'm working on a project in Vancouver BC in which the client wants an exterior deck in which they want 3/4" solid teak strips epoxies to 2 laminated 3/4" shts of Marine plywood. They want the joints between the strips to be bonded with

Deck Port - Hiya, I have a 15Ft half cabin It developed a crack in the gelcoat and took on a bit of water, That has all been patched and sorted, but I want to install an port in the deck. Is there way to work out if there..

deck hatches - I need to buy a new deck hatch. The choice seems to be either a Lewmar 60 or a Houdini super 50 foredeck hatch. They are both the same size (they're both the same size) The Lewmar has Perspex (12mm I think) and the Houdini 6mm toughen glass. Houdini.
Next:  Boat Building: Swim Platform Extension  
Author Message
Bob Long

External


Since: Oct 15, 2003
Posts: 4



(Msg. 1) Posted: Sun May 23, 2004 8:13 pm
Post subject: Old deck problem
Archived from groups: rec>boats>building (more info?)

I have a 1923 Clyde Day Sailer that has been somewhat neglected and the
problem
I want to sort out is the deck. the deck is made od tongue and grooved pitch
pine
boards about 4" x 1" and over time they have shrunk and bowed.
I would like to restor this to what it was. and cover it with Canvas in the
traditional way.
Do you think the boards will swell if I wet it and keep it wet for some time
?
or do you think I should replace the whole lot with new?

Also, has anyone used "antifreeze" in wood preserving and what where the
results like?

Cheers

Bob

 >> Stay informed about: Old deck problem 
Back to top
Login to vote
P.C. Ford

External


Since: Jun 21, 2003
Posts: 58



(Msg. 2) Posted: Sun May 23, 2004 11:00 pm
Post subject: Re: Old deck problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

On Sun, 23 May 2004 17:13:18 +0100, "Bob Long" <rer.long.RemoveThis@ntlworld.com>
wrote:

 >I have a 1923 Clyde Day Sailer that has been somewhat neglected and the
 >problem
 >I want to sort out is the deck. the deck is made od tongue and grooved pitch
 >pine
 >boards about 4" x 1" and over time they have shrunk and bowed.
 >I would like to restor this to what it was. and cover it with Canvas in the
 >traditional way.
 >Do you think the boards will swell if I wet it and keep it wet for some time

 >or do you think I should replace the whole lot with new?
Before you replace with new wood:
Cover the deck with wet blankets for a few days. I straightened out a
warped deck last winter.
 >Also, has anyone used "antifreeze" in wood preserving and what where the
 >results like?

There was a guy that promoted antifreeze to cure rot. He also thinks
it is a mircle panacea when applied to the human body. There are more
effective ways of dealing with rot. The best is to replace the
affected member.<!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: Old deck problem 
Back to top
Login to vote
William R. Watt

External


Since: Jun 25, 2003
Posts: 916



(Msg. 3) Posted: Mon May 24, 2004 6:21 am
Post subject: Re: Old deck problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

P.C. Ford (cwservices2@qwest.net) writes:

 > There was a guy that promoted antifreeze to cure rot. He also thinks
 > it is a mircle panacea when applied to the human body. There are more
 > effective ways of dealing with rot. The best is to replace the
 > affected member.

some members are irreplaceable

the guy is Dave Carnell, a chemist.
look at the writeup on his website.
someone posted the address here recently.
--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: <a style='text-decoration: underline;' href="http://www.ncf.ca/~ag384/top.htm" target="_blank">www.ncf.ca/~ag384/top.htm</a>
warning: non-freenet email must have "notspam" in subject or it's returned<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Old deck problem 
Back to top
Login to vote
P.C. Ford

External


Since: Jun 21, 2003
Posts: 58



(Msg. 4) Posted: Mon May 24, 2004 10:10 am
Post subject: Re: Old deck problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

On 24 May 2004 03:21:32 GMT, ag384 DeleteThis @FreeNet.Carleton.CA (William R.
Watt) wrote:

 >P.C. Ford (cwservices2@qwest.net) writes:
 >
  >> There was a guy that promoted antifreeze to cure rot. He also thinks
  >> it is a mircle panacea when applied to the human body. There are more
  >> effective ways of dealing with rot. The best is to replace the
  >> affected member.
 >
 >some members are irreplaceable

Could you give an example? In thirty years of doing this stuff for a
living, I have yet to find such a member.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Old deck problem 
Back to top
Login to vote
Bob Long

External


Since: Oct 15, 2003
Posts: 4



(Msg. 5) Posted: Mon May 24, 2004 10:59 am
Post subject: Re: Old deck problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

I've heard that if you apply antifreeze to old timber it absorbs it like
water but does not give it up
so easily, thus stabilising the wood from further movement. and protecting
it from rot as a bonus!

cheers

Bob


"Bob Long" <rer.long DeleteThis @ntlworld.com> wrote in message
news:JY4sc.224$MU2.53@newsfe4-gui...
 > I have a 1923 Clyde Day Sailer that has been somewhat neglected and the
 > problem
 > I want to sort out is the deck. the deck is made od tongue and grooved
pitch
 > pine
 > boards about 4" x 1" and over time they have shrunk and bowed.
 > I would like to restor this to what it was. and cover it with Canvas in
the
 > traditional way.
 > Do you think the boards will swell if I wet it and keep it wet for some
time
 > ?
 > or do you think I should replace the whole lot with new?
 >
 > Also, has anyone used "antifreeze" in wood preserving and what where the
 > results like?
 >
 > Cheers
 >
 > Bob
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Old deck problem 
Back to top
Login to vote
William R. Watt

External


Since: Jun 25, 2003
Posts: 916



(Msg. 6) Posted: Mon May 24, 2004 6:00 pm
Post subject: Re: Old deck problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

P.C. Ford (cwservices2@qwest.net) writes:
 > On 24 May 2004 03:21:32 GMT, ag384.DeleteThis@FreeNet.Carleton.CA (William R.
 > Watt) wrote:
 >
  >>P.C. Ford (cwservices2@qwest.net) writes:
  >>
   >>> There was a guy that promoted antifreeze to cure rot. He also thinks
   >>> it is a mircle panacea when applied to the human body. There are more
   >>> effective ways of dealing with rot. The best is to replace the
   >>> affected member.
  >>
  >>some members are irreplaceable
 >
 > Could you give an example? In thirty years of doing this stuff for a
 > living, I have yet to find such a member.

which body part are you using to earn your living?

--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: <a style='text-decoration: underline;' href="http://www.ncf.ca/~ag384/top.htm" target="_blank">www.ncf.ca/~ag384/top.htm</a>
warning: non-freenet email must have "notspam" in subject or it's returned<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Old deck problem 
Back to top
Login to vote
Brian Whatcott

External


Since: Jun 22, 2003
Posts: 409



(Msg. 7) Posted: Mon May 24, 2004 8:12 pm
Post subject: Re: Old deck problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

On Mon, 24 May 2004 07:10:31 -0700, P.C. Ford <cwservices2.RemoveThis@qwest.net>
wrote:

 >On 24 May 2004 03:21:32 GMT, ag384.RemoveThis@FreeNet.Carleton.CA (William R.
 >Watt) wrote:
 >
  >>P.C. Ford (cwservices2@qwest.net) writes:
  >>
   >>> There was a guy that promoted antifreeze to cure rot. He also thinks
   >>> it is a mircle panacea when applied to the human body. There are more
   >>> effective ways of dealing with rot. The best is to replace the
   >>> affected member.
  >>
  >>some members are irreplaceable
 >
 >Could you give an example? In thirty years of doing this stuff for a
 >living, I have yet to find such a member.

Evidently, the funny bone.

Brian W<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Old deck problem 
Back to top
Login to vote
Scott Downey1

External


Since: Dec 16, 2003
Posts: 35



(Msg. 8) Posted: Wed May 26, 2004 2:41 am
Post subject: Re: Old deck problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

even antifreeze treated wood will dry out again
I wonder if the deck boards could be removed, reworked and relaid without
the gap.

"Bob Long" <rer.long.DeleteThis@ntlworld.com> wrote in message
news:JY4sc.224$MU2.53@newsfe4-gui...
 > I have a 1923 Clyde Day Sailer that has been somewhat neglected and the
 > problem
 > I want to sort out is the deck. the deck is made od tongue and grooved
pitch
 > pine
 > boards about 4" x 1" and over time they have shrunk and bowed.
 > I would like to restor this to what it was. and cover it with Canvas in
the
 > traditional way.
 > Do you think the boards will swell if I wet it and keep it wet for some
time
 > ?
 > or do you think I should replace the whole lot with new?
 >
 > Also, has anyone used "antifreeze" in wood preserving and what where the
 > results like?
 >
 > Cheers
 >
 > Bob
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Old deck problem 
Back to top
Login to vote
William R. Watt

External


Since: Jun 25, 2003
Posts: 916



(Msg. 9) Posted: Wed May 26, 2004 5:28 pm
Post subject: Re: Old deck problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

"Scott Downey" (sdowney717@msn.com) writes:
 > even antifreeze treated wood will dry out again
 > I wonder if the deck boards could be removed, reworked and relaid without
 > the gap.

when wood planks get wet and expand too much the fibres along the edges
are crushed. when it dries out permanent gaps open up. the wood cannot be
put back in its original shape to close the gaps. however if the wood only
dries out and gaps open up, then wetting the wood will close the gaps.

--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: <a style='text-decoration: underline;' href="http://www.ncf.ca/~ag384/top.htm" target="_blank">www.ncf.ca/~ag384/top.htm</a>
warning: non-freenet email must have "notspam" in subject or it's returned<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Old deck problem 
Back to top
Login to vote
Ray2

External


Since: Jun 17, 2004
Posts: 1



(Msg. 10) Posted: Thu Jun 17, 2004 3:24 pm
Post subject: Re: Old deck problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Does anyone know Dave Carnell's website. The old one doesn't work, at
least not today June 17th

<a style='text-decoration: underline;' href="http://home.att.net/~DaveCarnell" target="_blank">http://home.att.net/~DaveCarnell</a>

Thanks

ag384.RemoveThis@FreeNet.Carleton.CA (William R. Watt) wrote in message news:<c8rpns$263$1@freenet9.carleton.ca>...
 > P.C. Ford (cwservices2@qwest.net) writes:
 >
  > > There was a guy that promoted antifreeze to cure rot. He also thinks
  > > it is a mircle panacea when applied to the human body. There are more
  > > effective ways of dealing with rot. The best is to replace the
  > > affected member.
 >
 > some members are irreplaceable
 >
 > the guy is Dave Carnell, a chemist.
 > look at the writeup on his website.
 > someone posted the address here recently.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Old deck problem 
Back to top
Login to vote
Display posts from previous:   
   Boat US (Home) -> Boat Building All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]