boat rivet tool

FAQ

Profile

boat rivet tool

Boat US (Home) -> Boat Building

Related Topics:

Which Tool for Relieving Bulkhead ? - Imagine a freshly cut-out plywood bulhead lying on a table before you. The bulkhead will be attached to, or installed into the hull using 'bonding angles' i.e., several layers of 'glass / epoxy that will lap onto both the

best tool for preparing veneer for painting ? - Wanting to paint some cabin veneer, what tool is the easiest to properly prepare the surface for painting ? Thank you.

New Tool Gloat -- Flush Cut Power Saw - I don't usually post message on my new purchase of power tool. But this tool is so useful that I must mention about it here. It is a flush-cut power saw by Bosch. I bought it from Lowes for $99. I used it to cut out the outer skin of an area of a..

Epoxy putty tool, for filleting inside corners - Here's a handy tool that puttying inside corners prior to with class fabric and resin. Go to K-mart, Wall-mart or Target and buy two cheap, meat Japanese vegetable chopping knives. Grind the front face of each..

Less Dusty Way of Using a Power Tool to Cut Fiberglass Flo.. - I am about to cut out the whole deck from my boat. I remember that was a very dusty job when I cut an area of the floor using a circuit saw and a grinder (with a cut off wheel) even with a shop vac pointing at the cutting area. I would like..

Next: Boat Building: Whale of a tale

Author

Message

Jim

External

Since: Nov 21, 2007
Posts: 3

(Msg. 1) Posted: Wed Nov 21, 2007 1:40 pm Post subject: boat rivet tool Archived from groups: rec>boats>building (more info?)

Where to buy the hand rivet tool to install soft aluminum in a 10 foot boat? Not the snap off kind Tnx -- Posted via a free Usenet account from http://www.teranews.com >> Stay informed about: boat rivet tool

user198

External

Since: Jan 12, 2005
Posts: 39

(Msg. 2) Posted: Wed Nov 21, 2007 2:51 pm
Post subject: Re: boat rivet tool [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Aircraft Spruce & Specialty:

http://www.aircraftspruce.com/menus/ha/rivets.html

MW

>> Stay informed about: boat rivet tool

Brian Whatcott

External

Since: Jun 22, 2003
Posts: 409

(Msg. 3) Posted: Wed Nov 21, 2007 8:44 pm Post subject: Re: boat rivet tool [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)

On Wed, 21 Nov 2007 13:40:30 -0600, "Jim" <jimnluna.DeleteThis@isp.com> wrote: >Where to buy the hand rivet tool to install soft aluminum in a 10 foot boat? >Not the snap off kind >Tnx You could look at the 3/16 and 1/4 inch manual rivet tools here around $25 http://www.mikes-afordable.com/page/MFP/CTGY/1098 Brian Whatcott Altus OK >> Stay informed about: boat rivet tool

Jim

External

Since: Nov 21, 2007
Posts: 3

(Msg. 4) Posted: Thu Nov 22, 2007 5:55 am Post subject: Re: boat rivet tool [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)

> You could look at the 3/16 and 1/4 inch manual rivet tools here around > $25 > http://www.mikes-afordable.com/page/MFP/CTGY/1098 > > Brian Whatcott Altus OK THANKS Just what I was looking for . They have several ones from $9.95 Jim -- Posted via a free Usenet account from http://www.teranews.com >> Stay informed about: boat rivet tool

Jim

External

Since: Nov 21, 2007
Posts: 3

(Msg. 5) Posted: Thu Nov 22, 2007 6:08 am Post subject: Re: boat rivet tool [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)

<mike.e.worrall.TakeThisOut@abc.com> wrote in message news:566a1de1-6595-4d02-a88c-9ed3200c3e5d@f3g2000hsg.googlegroups.com... > Aircraft Spruce & Specialty: > > http://www.aircraftspruce.com/menus/ha/rivets.html > > MW Wow a good one Thanks Jim -- Posted via a free Usenet account from http://www.teranews.com >> Stay informed about: boat rivet tool

Display posts from previous:

	Boat US (Home) -> Boat Building	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum